Assembly and connection

Assembly and connection: scope, limits of use and technical checkpoints.

5 guides

Assembly and connection

Fitting and clamp systems for steam hose

Steam hose connections must be a system suitable for steam service and verified with the hose. A general hose clamp, a fitting of similar diameter or an assembly that looks sound is not sufficient. Assembly, inspection …
Assembly and connection

Using elbows and rigid pipe at a steam line outlet

Considering a suitable elbow or rigid pipe section instead of changing direction immediately at the hose outlet can reduce tight bending of the hose. However, the new part must be designed together with pressure, temper…
Assembly and connection

Bending and support plan for steam hose

Supports on a steam hose must carry the weight without crushing, twisting or forcing the hose to a tight radius. The load near the connection and the entire route are assessed together. A single universal support spacin…
Assembly and connection

Protection against hot surface contact

Hot surface protection is selected for defined risks such as operator contact and external heat exposure. Adding a heat sleeve does not automatically increase the hose's resistance to the internal steam temperature. The…
Assembly and connection

Safety questions before disconnecting a steam line connection

Before a steam connection is disconnected, energy isolation, residual pressure, temperature and trapped fluid must be assessed with a safe procedure. A valve appearing closed does not on its own prove that the assembly …

Fitting and clamp systems for steam hose